Swing industrial door operators are device that can control a swing doors for the pedestrian use. It is designed for impressively quiet performance and provides easy opening and positive closing under diverse conditions. It also provides an easy access and a flawless traffic movement in commercial and any industrial places with the best reliability and performance. So the movements of your doors are started slowly, with its speed increasing when it is in the middle of the sequence, then the door will slowly stops.
Swing industrial door operators uses hydraulic, pneumatic, or electric power for it to function. Swing door operators are also used to easily open overhead doors and garage doors. It’s also used to automatically open the doors in the area with many people like the grocery stores and malls. Swing door operators are also used to provide an easy access for those disabled people and for those who are using wheelchairs.
One set electric door opener includes: Opener, 2 arms, 2 remotes, 2 push buttons. Articulated arm and sliding arm both available, can be mounted on the hinge side and opposite hinge side.
Articulated Arm Sliding Arm
Remote control Introduction
| Model | SD3108 |
| Swing application | One-way open, single leaf and double leaf standard doors |
| Power supply | 220V/AC 110V/AC 50/60Hz |
| Motor | DC 12V brushless motor |
| Rated power | 45W |
| Door width | 1200mm |
| Door weight | 120kgs |
| Opening/Closing speed | 2-8 seconds (adjustable) |
| Opening time | 0-120seconds (adjustable) |
| Hold-open time | 1-30seconds (adjustable) |
| Environment temperature | -20 ~ +50°C |
| Manual force | <30N |
| Operation noise | <55db |
| Opener size | 410mm(L)*80mm(W)*75mm(H) |
| Packaing size | 460mm(L)*200mm(W)*120mm(H) |
| Opener weight | 5.5 kgs |
1. surface mounting
2. Push-Go: Automatic activation by pushing or pulling door panel
3..Quiet and aesthetically pleasing
4. Electric strike integration
5. Efficient and cost-effective
Note: backup battery is optional accessory, not included in one complete set.
1. Access keypad (card reader)
Designed for the control of office building,office,residential house, security system.Card reading and password inputting.Great power of card reading with the distance no less than 10cm.
2. Wire&wireless push button
3. Hand sensor switch
With the non-contact induction design, door can be open in an easy and clean way.Transmit distance is adjustable from 1 to 15 cm.
4. Passive Infrared sensor (Body sensor)
Just induce the movement of human body only.When someone moves, the sensor will react and door operator will be triggered to operate.Maximum detection speed: 5cm/s.
5. Foot sensor
When feet is detected, beam will be cut off and thereby trigger the signal for door opening.
6. Electric lock
Make your doors more security. Easy installation. Provide with bracket for installation.Holding force: 280Kg(600Lbs).
7. Hand programmer
Easily adjustable opening&closing speed, opening angle,hold open time by hand programmer.
| S/N | Value scope | Initial value | Function description |
| 1 | 10-100 | 65 | Opening speed |
| 2 | 10-100 | 55 | Closing speed |
| 3 | 1-10 | 2 | Damping opening speed |
| 4 | 1-10 | 2 | Damping closing speed |
| 5 | 1-60 | 20 | Damping opening distance |
| 6 | 1-60 | 20 | Damping opening distance |
| 7 | 0-120 | 2 | Hold-open time |
| 8 | 0-3 | 1 | Delay open time |
| 9 | 0-1 | 1 | Left and right directions of door opening |
| A | 0-1 | 1 | Fire alarm signal to open/close door |
| B | 30-200 | 90 | Opening/Closing angle |
| C | 0-30 | 20 | Locking force |
| D | 0-60 | 20 | Opeing braking force |
| E | 0-60 | 20 | Closing braking force |
Know more about the operator, function, programming, please visit our videos on Youtube:
 |
A safety feature is built-in to each door opener. When an obstacle is detected during the Operation of the opener,it will stop the opening or closing cycle immediately,until the opener is activated again and the obstacle is |
 |
| Manually open when power off |
Swing door operators for any commercial use should be strong and durable to handle any repetitive use. These door operators are normally used for smaller retail businesses. Just like the sliding doors, swing door operators can also use radar sensor that can detect any user. The moment the door operator detector detects a user, the door will automatically open. Swing industrial door operators also have three basic types. Those are the low energy device, full energy device, and the power assist device.
The low energy device type of swing operators uses a small amount of speed so it can open and close your doors in a moderate speed. The low energy device is commonly used in the entrance and exit of malls. The full energy device is directly opposite than the low energy device, because it uses a full speed in opening and closing the doors. Full energy devices are commonly used in the hospital most especially in the emergency entrance and exit. The last but not the least type of swing door operators is the power assist door operator device. Door operator device doesn’t automatically open when there is a user, rather it helps user to manually open the door but with the use of lesser force.
Swing industrial door operators are really a great help for people to easily open their doors with just using less amount of force and even without using. It is definitely the best to use in any commercial buildings or areas and most especially for the hospitals.
