Panasonic motor copy,same quality with low price. |
|||
|
|||
Built-in transformer,no need extra decoder 32 bit microprocessor in electric board make the door sliding reversely when touch obstacles; |
|||
|
|||
Two rolling wheels,teeth belt operate more stable Our rolling wheels have two wheels while products from other suppliers have only one. Two rolling wheels can balance the weight of the teeth belts. finally make the teeth belt operate more stable and low operation noise, Ther roller is made of polyurethane,it is durable and light. |
|||
|
|||
Complete perfect access control system Only entering the passcode or swiping card on the optional access keypad,people can be entered. |
|||
|
|||
Functions of Safty beam and microwave sensor The optional active rader&infrared safety sensor is combined the function of safety beam and microwave sensor If install it, no need safety beam and microwave sensor.More intelligent and convenient ,only need one wire connection, no need more for safety beam and microwave sensor. |
|||
|
|||
|
|||
The hydraulic rod connect cover and rail make the opener maintenance&installation easier. Made of thermal-break aluminium alloy, it possess better thermal insulation performance and leakproofness than normal aluminium alloy. |
|||
The hydraulic rod The beautiful oblong plastic end panel |
Model | SD150b | |
Door range | Single leaf | Double leaf |
Door leaf weight | Max 160kg*1 | Max 120kg*2 |
Door width | 600~3000mm | 600~1500mm |
Opening speed | 100~550mm/s(Adjustable) | |
Closing speed | 100~550mm/s(Adjustable) | |
Opening time | 0~9 seconds | |
Motor | DC 24V Brushless DC Servo Motor | |
Supply voltage | Input AC 110V/220V;50-60Hz | |
Working temperature | -20~50°C | |
Working noise | Less than 50 db |
Components | Quantity | Componets | Quantity |
Control panel | 1 | Reveiver | 1 |
Motor gear box assembly | 1 | Return pulley | 1 |
Microwave sensor | 2 | Terminal input assembly | 1 |
Tooth belt | 1*7m | Power switch | 1 |
End stop | 3 | Hanger roller bracket | 2 |
Remote control | 2 | Belt bracket link assembly | 2 |
Device for yaw checking | 1 | Microwave sensor | 2 |
Transmission rail and cover | 2*2.1m |
Infrared thermal, intelligent detecting
24.125GHZ microwave sensor module imports from Europe, using the impact detection control ,intelligent optimization appliances.It is highly independent of temperature and humidity and other environmental factors. Accurate region sensor adjustment and extremely reliable performance make it run faster and more stable. The firing frequency of it is up to 24.125GHZ. The accurate and sensitive induction and immunity to interference makes the whole perfect.
Microcomputer controller, efficient circuit, overload protection
Automatic doors controller is receiving signals from other sensors or detection switch for driving motor control door operating according to suitable manner. The controller comes with its own 24V power supply switch, without using of transformers. Safety beam, access control, external electric locks, back up battery, two-door interlock port enabling customers to use it according to actual needs.
External remote control | |
The receiver can be plugged directly to the transmitter comes standard with two, if more transmitters, please contact customer service. Tips: Olide uses extrapolation receiver module, because the signal is better than a lot of built-in remote control(automatic code). |
|
Working Principle The remote control supports Olide brand automatic doors use, it should be inserted with the use of automatic doors controller. It is an adjustable automatic door (automatic, normally open, normally closed, semi-open) state. Normally close: The door has been turned off, the sensor is invalid. Normally open: the door has been in open state. Automatic: You can go into the normal induction. Semi-open: open the door half shut down automatically. |
Frame door connect parts |
Floor guider accessories |
|
If your door is framed and no need glass hanger, then we will send you floor guider for framed doors. If your door is frameless and need glass hanger, then we will send you floor guider for frameless doors. As shown below: |
Framed door floor guider |
|
Frameless door floor guider Used on the framless glass door, so guide the door’s moving in correct direction. |
It is generally divided into single leaf door open and double open, double leaves door open is two leaves door fixed and two sliding. It is 3-5cm overlap portion between fixed door and sliding door,as shown below: |
|
Sliding Glass Width: doorway width divided by 4. Fixed glass width: total width openings divided by 4 then plus 5cm (overlapping portion between the door). The net opening width up to 200cm, if wider, you can purchase the track lengthened. |
|
Note: Door Weight: single leaf door open, the largest 150KG; double leaves door open: 125KG * 2 | |
|
|
Since the two glass doors movement separately, they work normally .It doesn’t matter the track formation is not related. |
Standard accessories include End stopper, Last round, Off prevention device, Power switch,Connecting frame, belt , etc.
|
Reasons |
Things to check |
No reaction Door |
No power |
Check the power line,check switch |
Track with foreign body |
Turn off the power, Push the door by hand, Determine whether the door is smooth movement |
|
Door automatic protection |
To confirm whether the external obstacles, Obstacle to run |
|
Lock undischarged |
Check whether there are external mechanical lock to lock the door |
|
Unable to fully open the door |
Semi-open mode |
Check whether the remote control is set to semi-open mode |
The door cannot be closed or abnormal operation |
Sensor malfunction |
check around the sensor in presence of continuous exercise equipment |
Control signal wire short circuit |
It can return to normal after disconnecting the signal |
|
Microwave interference source exists around the door |
Check the microwave interference sources |
|
Eye on the radio continued operation |
Confirm whether the electric eye is covered with dirt |
|
Confirm that electric eye deviating from the correlation angles |
||
The door is not running smoothly |
Great running resistance |
check whether there is any foreign body on guide rail |
check whether there is any obstacle on the door |
||
Open closed speed adjustment is not reasonable |
confirm the speed control |
Our standard size for the cover and transmission rail is 2*210cm,it is just like the picture one double leaf door shows.If door size is beyond it ,Or if it is single leaf door,please contact us to choose the correct size for you.
Double leaves door Single leaf door