Olide Non-contact Hand Sensor Infrared Switch

olide-512 wireless touchless hand sensor switches

There are wireless non-contact infrared switch M512 and wired hand sensor switch M513.Wireless infrared switch equipped with receiver, wired one has no receiver.

M512 Wireless touchless infrared switch

Olide Smart wireless Non touch infrared switch

M513 Wired Infrared Switch

Olide Smart Non touch infrared switch

Product Characteristics of M-512 Wireless Non-contact Infrared Switch

1. Adopts infrared modulation and demodulation, which is not easy to be misjudged by interference.

2. Non - contact induction with hands or reflective objects, clean and hygienic.

3.The induction distance is adjustable from 3-30cm. It can be adjusted for different occasions.

4. High sensitivity infrared , quick response.

5. Wireless transmission adopts 2.4g wireless communication technology, with good frequency consistency and high wireless transceiver stability.

6. Low power consumption sensor panel design, long battery life.

7. Receiver large capacity output, can be used with automatic door, electric lock and access control.

8. After receiving the signal, the door opening signal is output for 1.5 seconds. It is equipped with receiving buzzer and LED indicator. 9. Receiver wide voltage input design, 12 ~ 30V DC power input.

M512 wireless touchless infrared switch

M513 Wired Touchless Infrared Switch Features

5. Stainless steel metal panel design, with a special bottom box, convenient for a variety of occasions installation.

6.Low relay signal output can be used with automatic door, access control system.

M513 wired touchless infrared switch

M512 Wireless Touchless Infrared Switch Technical Specifications

Receiver 
Power supply: AC/DC 12-30V  Static current:  30mA 
Action current:  74mA(DC12V power supply) 

Main contact capacity

(wireless receiver): 

3A 30VDC 
Wireless Switch 
Power supply: 6V(4pcs AA batteries)  Static current:  <=80uA 
Battery life:  500times/day, can use 450days  Emission current:  10mA 
Infrared modulation frequency:  38KHz  Infrared scanning interval:  100ms 
Response time:  <=130ms  Launch distance: more than 30m in the open area
Working temperature: -42-45°C Working humidity: 10-90%RH

Size: 129mm(L)x129mm(W)x46mm(H)  Panel

          123mm(L)x50mm(W)x32mm(H)   Receiver

M513 Wired Touchless Infrared Switch Technical Specifications

Power supply: AC/DC 12-24V Static current: 30mA
Infrared modulation frequency: 38KHz Action current: 42mA(DC12V power supply)
Output holding time: <=30ms Launch distance: more than 30m in the open area
Working temperature: -42-45°C Working humidity: 10-90%RH

 

Published in Sensor Switch

Motion Sensor Detector

motion infrared sensor  (1)

Product application

The equipment integrates the motion & presence sensor together, applicable to the opening and safety protection of sliding doors. The infrared sensor is used for motion and presence detect, and can control the sensing range in an effective and relatively accurate way. 


General characteristics


►The infrared sensor for motion & presence adopts the background self-learning function, boot auto learning background state, intelligent automatic adapt to various scenarios. It can realize automatic and real-time precision compensation for backing background working time and can carry out self-correction for various external factors change (such as: slight vibration, deformation, moving gradually, darkness and sun etc.) self-correction, so that the sensor can work in a reliable way for a long term.








Technical parameters


Input power:

AC/DC 12  24V(-/+10%)

Light source:

infrared  940mm

Wire length:

2.5m

Light beam:

1 channel for presence detect, 4 channels for emitting, 16 channels for light pot, 3 channels for motion, 12 channels for emitting, 48 channels for light pots

Signal output:

relay, 1 channel for presence detect, 1 channel for motion

Self-learning time:

10s

Maximum mounting height:

3000mm

Operation indicator display:

green indicator for ready, yellow indicator for motion, red indicator for presence detect

Standby current:

30mA(when under DC12V)

Temperature range:

- 40°C to 60°C

Action current:

110mA(when under DC12V)

Detection area:

1600 (W) X800 (D) mm

Outline size:

229 (L) X67 (W) X41 (H) mm

Output maintaining time:

presence detect 500ms, motion 2s

Shell

ABS

Response time:

≤100ms

Beam type:

infrared modulation light

 
 

 

 

Payment Method

  western union1
  telegraphic transfer1 
  paypal1

follow us

facebook1 linkedin1
pinterest1 youtube1
twitter1 google1

 


   

 

Contact us

Address: East Industrial Area, Shaoxin, Zhejiang Province, China

TEL: +86 18507061674
Email: jason@olideautodoor.com
skype: Chinentech
Whatsapp:86 18507061674

Web Analytics