Using a automatic sliding door system is beneficial in both residential and industrial utility since it is very effective to maximize both small and large spaces. It contains a higher aesthetic value as compared to other normal hinged style.
DC 24V Brushless Motor Worm gear reduce make it low noise; |
|
|
|
Intelligent 32 bit microprocessor, 32 bit microprocessor in electric board make Opening&closing parameters can be intelligently ajusted by control panel without extra programmer; Various connectors can connect with different |
|
|
|
Bigger hanger roller,lower operation voice Bigger diameter hanger roller after improved is stronger and moving faster than smaller roller; |
|
|
|
Complete perfect access control system Only entering the passcode or swiping card on the Autodoor can reach the functions of automatic/exit Various optional accessories such as foot sensor,touch |
|
|
|
Functions of Safty beam and microwave sensor The optional active rader&infrared safety sensor is combined the function of safety beam and microwave sensor. If install it, no need safety beam and microwave sensor.More intelligent and convenient ,only need one wire |
|
|
|
The hydraulic and between cover and rail make maintenance&installation easier. The hydraulic rod connect cover and rail make opener maintainance & installation easier.
Hydraulic rod Beautiful oblong plastic end panel |
Model | SD190 | |
Door range | Single leaf | Double leaf |
Door leaf weight | Max 150kg*1 | Max 135*2 |
Door width | 600~3000mm | 600~1500mm |
Opening speed | 100~550mm/s(Adjustable) | |
Closing speed | 100~550mm/s(Adjustable) | |
Opening time | 0~9 seconds | |
Motor | DC 24V Brushless DC Servo Motor | |
Supply voltage | Input AC 110V/220V;50-60Hz | |
Working temperature | -20~50°C | |
Working noise | Less than 50 db |
Components | Quantity | Componets | Quantity |
Control panel | 1 | Reveiver | 1 |
Motor gear box assembly | 1 | Return pulley | 1 |
Microwave sensor | 2 | Terminal input assembly | 1 |
Tooth belt | 1*7m | Power switch | 1 |
End stop | 3 | Hanger roller bracket | 2 |
Remote control | 2 | Belt bracket link assembly | 2 |
Device for yaw checking | 1 | Tansformer | 1 |
Transmission rail and cover | 2*2.1m | Mcrowave sensor | 2 |
The advantages for the electric sliding door system:
Intelligence: The electric sliding door system is controlled by the good quality integrated chips. All the work parameters can be adjusted by the hand programmer, such as opening and closing speed, open direction, delay-open time etc. And The system can automatically adapt itself to different door weight.
Reliability: Thanks to professional mechanic design and high-efficiency DC brushless motor, the electric sliding door system can work very well with low noise for a long time. With the help of advanced synchronous belt and perfect design of power supply circuit , the door moves very stably.
Energy Saving: Thanks to the semi-open function, can help to keep the temperature and humidity inside the room and to minimize the costs of the air conditioner as well.
Convenience All the adjustments can be implemented with adjust controller. It is facilitate to operate the operator. Open and close smoothly with high efficiency. Fast installation and easy replacement for assembly parts.
Safety: The motorized sliding doorhave the alarm system which can prevent people from nipping, so it is safe for users. With motor self lock function, the operator can lock the door without mechanical locks. The door leaf will automatically turn back if it touches any obstacles.
Our standard size for the cover and transmission rail is 2*210cm,it is just like the picture one double leaf door shows.If door size is beyond it ,Or if it is single leaf door,please contact us to choose the correct size for you.
Double leaf door Single leaf
Dynamical system:
1. A motor provides the main force for opening and closing, and controls the acceleration and deceleration of door leaf operation.
2. The tracks that the door leaf moves along constrain the spreader and wheel system to move in a particular direction.
3. The spreader and wheel system is used for hanging door leaves, and drives them run under the dynamic traction.
4. Synchronous belt (some factories use triangle belt) is used to transmit power produced by motor, and then draw the spreader and wheel system.
5. The guiding system is a device set under the door leaf for orientation and positioning, and it can prevent the door leaves from swinging back and forth when in operation.
Friendly reminder for inductive doors installation:
1. If the rail of automatic doors is installed on the welding iron framework, the whole framework of automatic doors should use square iron pipe with 3cm wall thickness, or use other materials that firm and strong.
2. Keep the whole framework horizontal vertical, firm and solid during installation. The nstallation rail should keep smooth and no burr and the aluminum alloy rail should also keep horizontal vertical and firm.
3. If installed on bearing wall, the aluminum alloy rail should also keep horizontal vertical and firm.
4. Check dampers are installed after adjusting the door framework, and they must keep firm.
5. Sopporting screws and leather cushion must be applied if you use our automatic frameless doors.
6. Make sure that the probe head stay steady and no jiggling.
Chinentech, the automatic entrance expert, Off you with effective and high quality automatic sliding door kit or electric sliding door system.