The Automatic Bi-Parting Sliding doors is very suitable for interior or exterior use for public buildings and even for private applications. It was designed with different material stainless steel, aluminum, which has finishes range. All of the aluminum parts that are visible were powder coated in different RAL color. The panes of this type of automatic door were double glazed glass for safety with 77mm fascia height.
In installing automatic doors like automatic bi part sliding doors, it is better if you going to connect it to the fire alarms in order to comply on fire regulation as well as to make sure that there will be less emergencies that may occur in the building or in any areas. The door will stay open if you have activated the fire alarm, until it was reset.
DC 24V Brushless Motor Worm gear reduce make it low noise; |
|
|
|
Intelligent 32 bit microprocessor, 32 bit microprocessor in electric board make Opening&closing parameters can be intelligently Various connectors can connect with different |
|
|
|
One more reduce wheel make the teeth belt more stable and low operation noise, |
|
|
|
Complete perfect access control system Only entering the passcode or swiping card on the Autodoor can reach the functions of automatic/exit Various optional accessories such as foot sensor,touch |
|
|
|
The optional active rader&infrared safety sensor is combined the function of safety beam and microwave sensor |
|
|
|
Special LM-shaped girder,”Record”similar quality Heavier and strong beam and cover |
|
STM 20-200 beam and cover Weight of 4.2 meters cover is about 16kg |
Normal beam and cover from other suppliers Weight of 4.2 meters cover is only 10 kg |
Model | STM 20-200 | |
Door range | Single leaf | Double leaf |
Door leaf weight | Max 200kg*1 | Max 180kg*2 |
Door width | 600~3000mm | 600~1500mm |
Opening speed | 100~550mm/s(Adjustable) | |
Closing speed | 100~550mm/s(Adjustable) | |
Opening time | 0~9 seconds | |
Motor | DC 24V Brushless DC Servo Motor | |
Supply voltage | Input AC 110V/220V;50-60Hz | |
Working temperature | -20~50°C | |
Working noise | Less than 50 db |
Components | Quantity | Componets | Quantity |
Control panel | 1 | Reveiver | 1 |
Motor gear box assembly | 1 | Return pulley | 1 |
Microwave sensor | 2 | Terminal input assembly | 1 |
Tooth belt | 1*7m | Power switch | 1 |
End stop | 3 | Hanger roller bracket | 2 |
Remote control | 2 | Belt bracket link assembly | 2 |
Device for yaw checking | 1 | Mcrowave sensor | 2 |
Transmission rail and cover | 2*2.1m |
Our standard size for the cover and transmission rail is 2*210cm,it is just like the picture one double leaf door shows.If door size is beyond it ,Or if it is single leaf door,please contact us to choose the correct size for you.
Double leaf door Single leaf
Among all the kinds of automatic sliding door, automatic bi-parting sliding doors are one of the most efficient, convenient, and reliable. It offers several features that will surely provide a safe and easy access on your building. It is reliable and smooth, it has full threshold for safety, emergency opening in case of fire or any power failure.
With the benefits that this automatic bi-parting sliding doors, it will definitely provide easy and safe access of your area. Moreover, it creates an effortless convenience as well as the feeling of feeling of being secure. It has range for possible configuration as well as functions that allow accessing optimized traffic flows.
Dynamical system of Automatic Bi-Parting Sliding Doors:
1. A motor provides the main force for opening and closing, and controls the acceleration and deceleration of door leaf operation.
2. The tracks that the door leaf moves along constrain the spreader and wheel system to move in a particular direction.
3. The spreader and wheel system is used for hanging door leaves, and drives them run under the dynamic traction.
4. Synchronous belt (some factories use triangle belt) is used to transmit power produced by motor, and then draw the spreader and wheel system.
5. The guiding system is a device set under the door leaf for orientation and positioning, and it can prevent the door leaves from swinging back and forth when in operation.