The power supply is suitable for access controllers for building intercom and various entrance & exit, and can normally provide a DC12V current when charged, and provide a DC current by lithium battery in case of power failure.

►It adopts high performance and high efficiency transformer, with high output efficiency, less heating and low noise.

►The international design of appearance and panel is characterized by small volume and exquisite appearance, suitable for mounting in all occasions.

►The product is provided with a set of unlocking and a set of dry contact signal output, which is especially suitable for occasions where the lock is unlocked and the autodoor is opened, and the interior time difference fitting is completed, and the door is opened after the lock is unlocked.

►It is provided with a passive open signal input, convenient for realizing door opening control in various ways.

►The power supply can be used as the signal converter for the access controller that generates the delayed contact signal due to using delay dry contact signal output.

►It is provided with door opening delay time adjustment of 5S or 10S.

►Intelligent charge and discharge management, charge indicator prompt, if the battery voltage is too low or almost full, it enters slow charge, the red indicator flashes slowly, when it enters fast charge, the red indicator flashes fast, when it discharges, the blue indicator flashes.

►If you want to prolong the working time of the battery in case of power failure, a lithium battery can be added to use conjunction with 211F lithium battery in the atlas.

Technical parameters