Adding a different appeal to your house will be possibly achieved through installing of garage door opener. This garage door opener caters to add unique design to your parking garage. There are various garage door openers available in the market. One of those is roll up garage door opener.
What is roll up garage door opener?
Typically, Garage door opener is a motor-powered device that entails to close and open the door of each garage. This is primarily designed with switch control put on the wall of the garage. It is also designed with remote controls handed down by the owner.
However, this type of roll-up door is designed with numerous panels joint by hinges with attached wheels to its sides. The wheels are set inside the track which is composed of metal. These wheels serve to lock the door into the right alignment and give a particular surface for wheel rolling on.
The installation process needs to be carefully done for the door to function well.
| Model | 2000-3p | 1300-3p | 1500-3p |
| Voltage | 380V | ||
| Current | 4.1A | 3.5A | 4.0A |
| Power | 750W | 600W | 600W |
| Lifting force | 2000Kg | 1300Kg | 1500Kg |
| Lifting Height | 12M | 9.5M | 12M |
| Output torque | 2450N.m | 1401N.m | 1617N.m |
| Output speed | 3.6r/min | 5.4r/min | 4.7r/min |
| Utilized Chain | 16A | 12A | 12A |
| Model | 300-1p | 500-1p | 600-1p | 800-1p | 1000-1p |
| Voltage | 220V | ||||
| Current | 2.8A | 3.3A | 3.3A | 4.7A | 4.7A |
| Power | 180W | 300W | 370W | 400W | 400W |
| Lifting force | 300Kg | 500Kg | 600Kg | 800Kg | 1000Kg |
| Lifting Heigh | 6M | 6M | 6M | 6M | 7M |
| Output torque | 168N.m | 314N.m | 412N.m | 647N.m | 809N.m |
| Output speed | 6r/min | 6r/min | 6r/min | 4.2r/min | 3.6r/min |
| Utilized Chain | 08B | 10A | 10A | 10A | 10A |
ROLL UP GARAGE DOOR OPENER INSTALLATION
The basic steps to install roll up garage door opener
1. Draw together the parts of the door tracks. The specific process will depend on the manufacturing company of the garage door opener. It is better to carefully follow their given instructions.
2. Set the rollers and other brackets to be used on the lower section of the door. Then, take the board to the door openings to align it.
3. Slip the trails above the door panel's wheels. Make sure to put a little space in between of the tracks and the panels. It is for the convenience of moving the garage door opener.
4. Put a screw partly passing though the tracks' holes and its framing. If there is a need of tracks adjustment, do not completely drive screws into its framing.
5. Join the roller and the hinge one side of the panel's second door.
6. Put the panel's second door above the first panel. Let the wheel to slide into the track just the way you make it.
7. Fasten the wheel to the remaining side of the panel's second door.
8. Recheck the tracks' level and see whether they are too constricted against the door. Drive screw to tighten them into the frame of the door.
There is nothing better door function if there is correct installation process took place. Installing roll up garage door opener is an elegant door opener for any house or building. Therefore, to fully enjoy its function make sure to fully understand the given instructions on how to put this type of garage door.
APPLICATION OF ROLL UP GARAGE DOOR OPENER
BULK ORDERS FROM OUR CUSTOMERS
